How To Start, Run, & Stop The Conveyor On The Biesse Akron 1440 Edge Bander

In this video you will learn how to:

  1. Set the direction of the conveyor
  2. Start the conveyor
  3. Stop the conveyor

Detailed instructions below the video.

Detailed Steps

  1. Set the direction of the conveyor – Before turning the conveyor ON, you must set the direction of the conveyor. If you turn the black rotary switch to the left, the parts will go straight off to the back of the machine. If the switch is turned to the right, the parts will come over and drop down on the table and come back to you.
  2. Start the conveyor – Press the Green button on the machine to start the conveyor.
  3. Stop the conveyor – Press the Red button (with a white circle in the middle) on the machine to stop the conveyor.
Print Friendly, PDF & EmailPrint Friendly