How To Fix Excess Glue Issues When Using The Biesse Akron 1440 Edge Bander

In this video you will learn how to:

  1. Open the hood of the machine
  2. Check for any clogging up of glue

​

Detailed instructions below the video.

Detailed Steps

  1. Open the hood of the machine – Press the green button towards the left-hand-side of the work screen and flip the dial under the button downwards to unlock the hood. Wait for 15 seconds. Then walk through the left side of the work screen to the rear of the machine, and open the hood.
  2. Check for any clogging up of glue – In case you have glue on your pieces, check for any clogging up by leaning forward in between the two white tubes towards the end of the machine, and check just below the circular blue face with the goggles label. Clean it if it’s clogged up.
Print Friendly, PDF & EmailPrint Friendly